Sodium and chloride (salt) in well water

How sodium and chloride can affect drinking water quality, potential health and plumbing impacts and available treatment options.

Overview

Salt in drinking water refers mainly to the presence of sodium and chloride. Both occur naturally in groundwater. Elevated levels may affect taste, plumbing and household uses. High sodium levels may be a concern for people on sodium-restricted diets.

Sources

Sodium and chloride may enter drinking water from natural or human-related sources, including:

  • natural underground salt deposits
  • relic seawater from areas covered by the ocean after the last ice age
  • road salt and road salt storage facilities
  • discharge from water softeners
  • septic system contamination
  • saltwater intrusion in coastal areas

Sodium and chloride levels may vary seasonally and are often higher during winter months in areas affected by road salt.

Acceptable concentrations in drinking water

Chloride has an Aesthetic Objective of less than or equal to 250 milligrams per litre (mg/L), based on taste.

Sodium has an aesthetic guideline of less than or equal to 200 mg/L. For individuals on sodium-restricted diets, a level of 20 mg/L or less is recommended.

Elevated levels of sodium and chloride may increase water corrosivity and shorten the lifespan of plumbing, hot water heaters and household appliances.

Testing

Laboratory testing is required to determine sodium and chloride concentrations in drinking water. These substances cannot be reliably detected without testing.

Testing recommendations include:

  • use of an accredited laboratory
  • collection of samples following laboratory instructions

For more information on water testing services, please see: Well water testing. Testing costs vary depending on the laboratory and the number of parameters analyzed. Health Canada guidance is also available on acceptable sodium and chloride levels in drinking water.

Health effects

High sodium levels in drinking water may be a concern for individuals with:

  • high blood pressure
  • kidney or heart conditions
  • sodium-restricted diets

Chloride does not usually pose a direct health concern but may affect taste and contribute to corrosion.

Health risks from sodium and chloride occur through ingestion only, including:

  • drinking
  • cooking
  • brushing teeth

Aesthetic and system impacts

Elevated salt levels may cause:

  • salty taste in drinking water
  • corrosion of plumbing and fixtures
  • reduced lifespan of appliances
  • damage to plants when used for watering

Gradual increases in salt concentration may make taste changes harder to detect.

Actions to reduce salt

When sodium or chloride levels are elevated, identifying the source is important. If road salt is suspected, actions may include:

  • confirming whether salt levels vary seasonally
  • ensuring the well meets minimum setback distances from public roads
  • verifying that ground slopes away from the wellhead
  • having a licensed well driller inspect the well casing and construction

If naturally occurring salt is present year-round, treatment may be the most practical option.

In coastal areas, saltwater intrusion may be linked to proximity to the ocean or over-pumping of freshwater aquifers. In these cases, corrective actions may be limited. General actions that may reduce risk include:

  • reducing overall water use
  • avoiding unnecessary pumping
  • properly decommissioning unused or contaminated wells
  • using alternative water sources for drinking and cooking, if available

Treatment options

Boiling water does not remove sodium or chloride. Effective treatment options include reverse osmosis and distillation. Treatment may be applied at a single tap to reduce cost and water waste. Whole-house treatment may not be practical in all cases, especially when salt concentrations are very high.

Treatment systems should be certified to meet current NSF standards and installed and maintained according to the manufacturer’s instructions. More frequent testing is recommended to confirm treatment performance.

Additional information on treatment options is available through private water treatment companies or the nearest regional Health Protection Branch office.