On this page
TIS Connect Portal
Use the Technical Inspection Services portal to apply for new professional licences, power engineering and gas exams, and other TIS services.
Licence Renewal
Renew your technical licence online through SNB.
Electrical construction point call-ins
Report your progress on current electrical projects.
Boiler and pressure vessels
-
Boiler and pressure vessel inspection
Certificates of Inspection are required to operate boilers and pressure vessels.
-
Boiler and pressure vessel installation permit
An installation permit is required to install or modify boilers, pressure vessels or pressure piping systems.
-
Boiler and pressure vessel installation registrations
Register a new design or boiler and pressure device.
-
Certificate of competency
Certificates to carry out boiler inspections are issued by the chief boiler inspector.
-
Power engineer licences
Learn about the classes of Power Engineer Licences and requirements for each.
-
Steamfitter-pipefitter licence
Apply for a steamfitter-pipefitter licence.
-
Welder’s certificate
Learn how to apply for a welder’s certificate and associated fees.
-
The National Board of Boiler and Pressure Vessel Inspectors
The National Board of Boiler and Pressure Vessel Inspectors is the worldwide leader in pressure equipment safety, providing training and certification for programs and inspectors involved in the BPV Industry.
Building code
-
Building code
New Brunswick aligns all building construction and demolition standards with both National Building and Energy Codes of Canada, including the inspection appeal process.
-
Regional Service Commissions (PDF 121 KB)
Find the closest Regional Service Commission Office near you and their contact information.
Electrical
-
Electrical inspections
Apply for an electrical inspection in your home or business.
-
Electrical licences
Apply for one of the eight different types of electrician licences.
-
Electrical plan approval
File a plan approval for your electrical installation.
-
Electrical wiring permits
Find out what projects require an electrical wiring permit and how to apply for one.
Elevators, lifts and amusement rides
-
Elevating device inspection
Annual inspections are required for all elevating devices.
-
Elevating device installation permit
Apply for a permit to install your elevating device.
-
Elevating device operating permit
An elevating device operating permit authorizes the owner to operate an elevating device.
-
Elevator licences
Learn about the two classes of elevator contractor’s licence and how to apply.
-
Elevator plan approval
Ensure you have all the right materials before submitting an elevator plan.
-
Amusement device inspection
Be sure your amusement device meets the safety code requirements.
-
Amusement device registration
Apply online to register your amusement device.
Licenced contractors
-
Backflow Testers
Backflow testers ensure the safe installation of plumbing systems so that water flows in the correct direction.
-
Electrical Contractors
Electricians inspect, install, repair, remove and reroute electrical wiring.
-
Plumbing Contractors
Plumbers install and repair water or sewage systems such as pipes, baths, toilets and heating devices.
-
Sign Installation Contractors
Specialized tradespeople install and remove signage in commercial and residential settings.
Plumbing
-
Plumbing inspections
Inspections are required for all new, altered or repaired plumbing systems.
-
Plumbing licences
Apply for one of the three types of plumber licences.
-
Plumbing permits
Apply for a permit before you start construction on a plumbing system.
-
Plumbing plan approvals
Learn which plumbing plans require approval before installation.
-
On-site sewage disposal
Certain residences require their own sewage disposal system—apply for the disposal installer course.
-
National Plumbing Code of Canada 2015
The National Plumbing Code of Canada 2015 sets out technical provisions for the design and installation of new plumbing systems and the alteration, renewal and repair of existing plumbing systems.
Propane, natural and medical gas
-
Class A compressed gas licences
Learn about the three types of Class A Compressed Gas Licences and work they allow.
-
Class G compressed gas licences
Learn about the five types of Class G Compressed Gas Licences and work they allow.
-
Class ICE compressed gas licences
Learn about the four types of Class ICE Compressed Gas Licences and work they allow.
-
Class PPO and PTO compressed gas licences
Learn about the four types of Class PPO and PTO Compressed Gas Licences and work they allow.
-
Class M, DAT, RVT and IMT compressed gas licences
Learn about Class M, DAT, RVT and IMT Compressed Gas Licences and work they allow.
-
Medical gas licences
Learn about the two types of medical gas licences and work they allow.
-
Gas business licences
Learn about the eight types of gas business licences and work they allow.
-
Gas installation permit
Apply for a permit before starting any gas installations, alterations or additions.
-
Gas inspection
All new gas system installations, modifications or additions must be inspected.
-
Gas plan approval
Gas plans and specifications must be approved before work begins on new or altered gas installations.